1/4" Tap
Crosby Eye Nuts
Crosby® eye nuts are made of drop-forged steel and give you a lifting point on a threaded bolt or stud. Bruce Industrial stocks Crosby G-400 lifting eye nuts in eight sizes, with tap sizes from 1/4" to 1-1/4", all available to order online. Loads are based on a 5 to 1 safety factor and a vertical pull, not on the connecting bolt or stud.
- Sizes
- 8
- Largest tap
- 1-1/4 in
- Starting at
- $19.78
How to Choose a Lifting Eye Nut
Start with the thread on your bolt or stud, then check how the load will pull. Selection always depends on your application, so talk to our team if you're not sure.
Match the Tap
The eye nut tap size needs to match your thread. A 5/8" stud takes a #4 eye nut with a 5/8" tap. Each card above lists both the material size and the tap size.
Plan for a Vertical Pull
Crosby eye nut ratings assume a vertical pull. If your lift will pull at an angle, talk to our team before you order.
Eye Nut or Eye Bolt?
An eye nut threads onto a bolt or stud. For a lifting point that threads into a tapped hole instead, see our eye bolts.
Have a Question About Sizing?
Our team can confirm the right Crosby eye nut for your bolt, stud, and lift. Call us or send a message with your thread size and we'll get back to you.
Crosby Eye Nuts From Bruce Industrial
Every Crosby G-400 eye nut we carry is drop-forged steel, quenched and tempered, then hot dip galvanized. Crosby eye nuts meet or exceed all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements, plus other performance requirements including fatigue life and impact properties.
All eight sizes can be ordered online by part number. Need several sizes or a bulk quantity? Request a quote, and see our rigging services if you need the lift planned or done.
Crosby Eye Nut FAQs
What size eye nut do I need?
Match the eye nut tap size to the thread of your bolt or stud. A 5/8" stud takes a #4 eye nut with a 5/8" tap. We stock Crosby G-400 eye nuts with tap sizes from 1/4" to 1-1/4".
Are Crosby eye nut ratings based on a vertical pull?
Yes. Crosby eye nut loads are based on a 5 to 1 safety factor and a vertical pull, not on the connecting bolt or stud. If your lift will pull at an angle, talk to our team before you order.
What are Crosby eye nuts made of?
They are drop-forged steel that is quenched and tempered, then hot dip galvanized.
Can I buy Crosby eye nuts online?
Yes. All eight G-400 sizes can be ordered online. Choose your size above, or request a quote for bulk orders by calling (866) 899-2567.
